Skirted Toilets Pros And Cons

When it comes to toilets, there are many different types and styles to choose from. One popular type of toilet is the skirted toilet. Skirted toilets have a sleek and modern look and can help to save space in your bathroom.

However, there are also some potential drawbacks to using a skirted toilet. Here, we will take a look at both the pros and cons of skirted toilets so that you can decide if this is the right type of toilet for your home. One of the main benefits of skirted toilets is that they tend to be very easy to clean.

Because there is no gap between the floor and the back of the toilet, it means that there are fewer places for dirt and grime to build up. This makes skirted toilets much easier to keep clean than other types of toilets where you might have to brush or scrub around the base in order to remove all traces of dirt.

There are many factors to consider when choosing a toilet for your home, and skirted toilets are becoming increasingly popular. Here, we’ll take a look at the pros and cons of skirted toilets to help you decide if they’re right for you. Skirted Toilet Pros:

1. They’re Easy to Clean: Because there’s no nook or cranny for dirt and grime to hide in, skirted toilets are very easy to clean. A quick wipe down with a disinfectant cloth is all it takes to keep them looking like new. 2. They Have a Sleek, Modern Look: Skirted toilets have a streamlined appearance that can give your bathroom a more modern look.

If you’re planning on doing a bathroom renovation in the near future, skirted toilets can be a great option. 3. They Can Save You Space: Because they don’t have an exposed trapway, skirted toilets can save you up to two inches of valuable bathroom space. This can be especially helpful in small bathrooms where every inch counts!

Skirted Toilet Cons: 1. They May Be More Expensive Than Standard Toilets: While prices vary depending on the brand and model, skirted toilets generally cost more than standard models. However, this extra cost may be worth it if you’re looking for an easy-to-clean option with a modern look.

Are Skirted Toilets Harder to Install?

If you’re considering a skirted toilet for your bathroom renovation, you might be wondering if they’re more difficult to install than a standard toilet. The answer is: it depends. Skirted toilets generally have fewer parts and are therefore simpler to install than traditional toilets.

However, because they have a lower profile, skirted toilets can be more difficult to level and may require special installation techniques. So, if you’re not confident in your DIY skills, it’s probably best to leave the installation of a skirted toilet to the professionals.

What Does Fully Skirted Toilet Mean?

A fully skirted toilet is a type of toilet that has a skirt or panel that covers the entire circumference of the bowl. This type of toilet is typically used in residential bathrooms and is considered to be more aesthetically pleasing than a standard toilet. The skirt or panel can be made from a variety of materials, including ceramic, porcelain, or even metal.

The main advantage of a fully skirted toilet is that it can help to hide any unsightly plumbing that may be exposed on a standard toilet. Additionally, fully skirted toilets are easier to clean since there are no nooks and crannies for dirt and grime to build up in. In some cases, the skirt or panel may also provide additional support for the bowl, which can be helpful if your bathroom floor is not completely level.

If you’re considering installing a fully skirted toilet in your home bathroom, it’s important to make sure that you have enough clearance around the perimeter of the bowl. This type of toilet typically requires at least 12 inches of space all around it in order for the skirt or panel to fit properly. Additionally, you’ll need to choose a model that is compatible with your existing bathroom fixtures (such as your sink and bathtub).

Otherwise, you may need to make some modifications to your bathroom in order for everything to fit correctly.

How Do You Attach a Toilet to a Skirt?

If you’re wondering how to attach a toilet to a skirt, the process is actually quite simple. All you need is a few basic tools and supplies, and you can have your new toilet up and running in no time. Here’s what you’ll need:

– A drill – 1/2″ diameter PVC pipe – PVC pipe cutter

– 2 PVC elbows – 2 stainless steel hose clamps – Toilet flange (the part that bolts to the floor)

– Toilet bowl (the part that holds water) – Wax ring 1. Begin by drilling two holes in the back of the toilet bowl, about 6″ apart.

These will be used to attach the bowl to the flange. 2. Cut a length of PVC pipe long enough to reach from one hole to the other, plus a few extra inches for good measure. 3. Attach one elbow to each end of the pipe, then fit thepipe onto the holes in the back of the bowl.

4. Use hose clamps to secure the elbows in place. 5. Next, fit the flange onto the drainpipe coming out of your floor (or wall). If there’s no drainpipe present, you’ll need to install one before proceeding further.

6. Set the toilet bowl into place on top ofthe flange, making sure that it lines up with all four bolt holes evenly.

Does Kohler Make a Skirted Toilet?

Yes, Kohler does make a skirted toilet. The Veil skirted one-piece elongated dual-flush toilet is a sleek and modern option that will surely give your bathroom an updated look. This particular model features a soft-close seat, an adjustable water level, and a powerful flushing system.

Skirted Toilet Elongated

There are many reasons to choose a skirted toilet elongated over a standard round version. One reason is that it provides a more comfortable seating position for people of all sizes. It also gives the bathroom a more polished look, as the skirt conceals the unsightly plumbing fixtures.

In addition, skirted toilets are easier to clean because there are no nooks and crannies for dirt and grime to accumulate.

Skirted Toilet Comfort Height

When it comes to toilets, there are two main types: standard and comfort height. Standard toilets are typically 14-15 inches from the ground to the seat, while comfort height toilets are around 17-19 inches. Most people find comfort height toilets to be more comfortable, especially if they have mobility issues.

Skirted toilets also tend to be more comfortable, as they have a smooth surface that is easy to clean.

One-Piece Skirted Toilet

There are a few benefits of one-piece skirted toilets. One, is that they’re easier to clean than two-piece toilets because there’s no crevice where dirt and grime can accumulate. Secondly, they tend to be more aesthetically pleasing and can give your bathroom a sleeker look.

Finally, they’re often more comfortable to sit on because the bowl is larger and the seat is positioned higher off the ground. If you’re considering purchasing a one-piece skirted toilet, here are a few things to keep in mind. Firstly, make sure that you have enough space in your bathroom as these types of toilets are usually bigger and bulkier than standard toilets.

Secondly, take into account your budget as one-piece toilets typically cost more than two-piece models. And lastly, think about who will be using the toilet – if it’s for a family home then a one-piece model with a larger bowl might be more suitable.

Conclusion

If you’re considering adding a skirted toilet to your bathroom, it’s important to weigh the pros and cons. On the plus side, skirted toilets are easier to clean because there’s no gap between the tank and bowl. They also have a sleeker, more modern look.

However, skirted toilets can be more expensive than traditional models and may be difficult to install if your bathroom is small.