How to Tie a Bowfishing Arrow Without a Slide

How to Tie a Bowfishing Arrow Without a Slide

In bowfishing, the arrow is attached to the bowstring with a knot. The most common way to do this is with a slide, but it’s possible to tie the arrow directly to the string without one. This can be useful if you’re in a hurry or if you don’t have a slide handy.

  • First, you need to find a piece of string that is about 3 feet long
  • Cut the string in half so that you have two pieces that are each about 1
  • 5 feet long
  • Tie a knot in one end of each piece of string
  • Thread one end of the string through the eyelet at the base of the arrow, and then tie another knot to secure it in place
  • Repeat this step with the other piece of string on the other side of the arrow
  • Thread both pieces of string through the loop on the slide, and then pull them tight so that the slide is snug against the arrow shaft
  • Tie a knot in each piece of string on either side of the slide, and then trim off any excess string

Table of Contents

How to Tie a Truglo Bowfishing Arrow

If you’re an avid bowfisherman, then you know the importance of having a good arrow. And one of the best arrows on the market is the Truglo Bowfishing Arrow. Here’s how to tie one so that it’s ready for action:

1. Start by threading your line through the eyelet at the base of the arrow. 2. Then, take the end of the line and tie a strong knot around the shaft of the arrow, just below the fletching. 3. Next, slide on your chosen point (we like broadheads for bowfishing) and screw it tight into place.

Be sure that your point is securely fastened before continuing! 4. Now it’s time to add your preferred amount of weight to the back end of the arrow. We like to use lead shot or weights specifically designed for bowfishing arrows, but you can get creative here – just make sure that whatever you use is securely fastened so it doesn’t come loose in mid-flight!

5. Finally, slip on a rubber stop or butt cap to keep everything in place and prevent accidental injuries while handling your finished arrow.

How to Tie Cajun Bowfishing Arrow

Cajun Bowfishing Arrow is a great way to add excitement to your bowfishing. This unique arrow allows you to shoot fish with your bow and reel them in, just like you would with a fishing rod. Here’s how to tie a Cajun Bowfishing Arrow so you can start enjoying this fun sport:

1. Start by threading the fishing line through the eye of the arrow. You’ll want to leave about 2-3 feet of line hanging off the end of the arrow. 2. Next, take the barbed point and screw it onto the front of the arrow shaft.

Be sure that the point is screwed on tight so it doesn’t come loose when you’re shooting. 3. Now it’s time to attach the reel. There are two ways to do this – you can either tie the reel directly to the arrow, or use a quick release system that will allow you to quickly detach the reel from the arrow when you’ve made your shot.

If you’re using a quick release system, simply thread the quick release onto the fishing line and then screw it onto the front of the reel seat. If you’re tying directly tothearrow, make sure your knot is extra secure and won’t slip loose when tension is applied (a double fisherman’s knot is a good option). 4. The last step is attaching your bowfishing rest!

This can be done in a number of different ways, but we suggest using zip ties or velcro straps for maximum security. Simply attach your rest of choice to your bow and then position it so that it’s ready for action – and you’re all set!

How to Tie Muzzy Bowfishing Arrow

Muzzy is a brand of bowfishing arrow that is very popular among bowfishers. These arrows are designed to be shot from a bow and have a special tip that helps them to stick to the fish. In order to tie your own Muzzy arrow, you will need the following supplies:

-Muzzy Arrow shaft -Muzzy broadhead -Bowfishing line

-Fletching glue -Scissors The first step is to take your Muzzy arrow shaft and screw on the broadhead.

Next, you will need to measure out about two feet of bowfishing line and tie one end around the base of the broadhead. The other end of the line will be used to tie onto your fishing reel. Now it’s time to add some fletching.

You can use either real feathers or synthetic vanes for this. If you are using feathers, you will need three per side. Apply a generous amount of fletching glue to each vane or feather and attach them evenly around the shaft of the arrow.

Once they are all in place, allow the glue to dry completely before moving on. The last step is to tie a piece of string or dental floss around the base of each vane or feather, just above where they meet the shaft of the arrow. This will help keep them in place during flight and ensure that they don’t get ripped off when you’re shooting at fish.

That’s it! Your Muzzy arrow is now ready for action.

Muzzy Bowfishing Arrows

Muzzy Bowfishing Arrows are designed for the serious bow fisherman. They are made with a tough fiberglass shaft and come equipped with a Muzzy Slip Tip Point. The Slip Tip Point is barbed and features a quick release mechanism that allows you to easily remove your arrow from the fish.

The arrows also come equipped with AMS Safety Slides, which help prevent accidental discharge of your arrow.

Attaching String to Arrow

When it comes to archery, one of the most important aspects is the string. The string is what propels the arrow and allows you to hit your target. Therefore, it is important to know how to attach string to arrow correctly.

There are a few different methods that can be used, but we will go over the two most common. The first method is called tying off. To tie off, you will need some thread or fishing line and a needle.

Start by threading the needle with the thread or fishing line. Then, make a small loop in the end of the string and poke the needle through the loop. Pull tight so that the loop is secure.

Next, take the needle and poke it through one side of the arrow shaft about an inch from where you want the string to sit. Poke it out through the other side and pull tight so that there is no slack in the string. Finally, tie a knot in both ends of the thread or fishing line to keep everything secure.

The second method is called whipping and is a bit simpler than tying off. Start by cutting a length of thread or fishing line that is twice as long as you need it to be. Fold this in half and tie a knot at one end to create a loop.

Bowfishing Safety Slide

Bowfishing is a great way to get outdoors and enjoy some time on the water. But, as with any sport, there are certain safety concerns that need to be considered. Here are a few tips to help you stay safe while bowfishing:

Wear closed-toe shoes. This will protect your feet from errant arrows and line. Wear eye protection.

A pair of sunglasses or safety glasses will help protect your eyes from flying debris. Be aware of your surroundings. Keep an eye out for other boats, swimmers, and obstacles in the water.

And be sure to watch for low-hanging branches when shooting! Keep your hands clear of the string path. When drawing back the bowstring, be sure to keep your fingers well away from the path of the arrow.

A stray arrow can cause serious injury! Don’t shoot at fish that are too small. It’s not only illegal in many states to harvest undersized fish, but it’s also dangerous.

A small fish can easily deflect an arrow, causing it to veer off course and possibly injure someone nearby.

Bowfishing Knot

Assuming you would like a blog post discussing the various knots used in bowfishing: There are many different knots that can be used for bowfishing, but some are more popular than others. The most common knot is the overhand knot, which is easy to tie and provides a strong hold.

Other popular knots include the improved clinch knot, Palomar knot, and uni-knot. Each of these knots has its own advantages and disadvantages, so it’s important to choose the right one for the job at hand. The overhand knot, for example, is easy to tie but can come loose if not tied correctly.

The improved clinch knot is more difficult to tie but provides a stronger hold. The Palomar knot is even more difficult to tie but is virtually impossible to break. And the uni-knot can be used for just about anything, making it one of the most versatile knots around.

No matter which knot you choose, make sure you practice tying it before heading out on your next bowfishing adventure. Nothing ruins a good day of fishing quite like having your line come loose because you didn’t know how to tie a proper knot!

How to Tie an Overhand Knot

An overhand knot is one of the most basic knots, and is often used as a starting point for more complex knots. It’s also known as a “thumb knot” because it’s traditionally tied with the thumb and forefinger. To tie an overhand knot, follow these steps:

1. Take the end of the rope in your left hand and hold it close to the standing part (the main body of the rope). 2. With your right hand, reach around the standing part and take hold of the end of the rope. 3. Now twist your right hand clockwise so that the end forms a loop around your fingers (this step can be a little tricky—just keep twisting until you’ve made at least two twists around your fingers).

4. Still holding on with your right hand, use your left hand to pull the standing part through the loop. 5. Tighten up the knot by pulling on both ends of the rope—and you’re done!

How to Tie a Bowfishing Arrow Without a Slide


How Do You Tie Bowfishing Arrows?

If you’re new to bowfishing, the process of tying your arrows may seem daunting. But with a little practice, you’ll be able to tie your arrows like a pro in no time! Here’s a step-by-step guide on how to tie bowfishing arrows:

1. Start by threading your arrow shaft through the eye of your bow fishing reel. 2. Next, take your bow string and tie a loop around the end of the arrow shaft. This loop will act as a stopper so that the arrow doesn’t slide off the reel when you’re shooting.

3. Now it’s time to attach your point (or tip) to the arrow shaft. There are several ways to do this, but the most common is to use adhesive or heat shrink tubing. Simply apply the adhesive or tubing around the base of the point and then slide it over the end of the arrow shaft until it’s snug against the stopper loop.

Heat shrink tubing will need to be heated with a heat gun in order to shrink down and secure itself around the point; just follow directions on whatever brand you’re using. 4. The final step is optional, but we recommend adding a small piece of reflective tape to each side of your finished arrow for improved visibility when night fishing. That’s it – you’re now ready to start shooting some fish!

Do You Need a Safety Slide for Bowfishing?

No, you do not need a safety slide for bowfishing.

Do You Aim High Or Low When Bowfishing?

There is a lot of debate over whether it is better to aim high or low when bowfishing. Some people say that you should aim high so that the arrow has a chance to bounce off the fish and into the water. Others say that you should aim low so that the arrow goes straight into the fish.

So, which is the right way to do it? The answer may surprise you, but there is actually no right or wrong answer when it comes to this debate. It all depends on what type of fish you are trying to catch.

If you are trying to catch a small fish, then aiming high might be the best option. The reason for this is because small fish tend to move around a lot more than larger fish. By aiming high, you give yourself a better chance of hitting the fish since it will be moving around more.

On the other hand, if you are trying to catch a large fish, then aiming low might be your best bet. The reason for this is because large fish tend to swim in straighter lines than small fish do. This means that they are less likely to move out of the way of an arrow that is coming at them from below.

So, as you can see, there is no right or wrong answer when it comes to whether you should aim high or low when bowfishing. It all depends on what type of fish you are trying to catch.

How Many Pound Draw Should You Use for Bowfishing?

When it comes to bowfishing, choosing the right draw weight is important. The heavier the draw weight, the more powerful your shot will be. But too much power can make it difficult to control your shot and could potentially injure yourself or your target.

So how do you know how much draw weight to use for bowfishing? As a general rule of thumb, you should use a draw weight that is comfortable for you to hold and shoot accurately. If you are new to bowfishing, start with a lower draw weight and work your way up as you become more comfortable and confident with your shooting.

Most experienced bowfishers recommend using a minimum of 40 pounds of draw weight for successful shots on fish. Of course, the type of fish you are targeting will also play a role in choosing the right draw weight. Smaller fish can be successfully taken down with lighter weights, while larger fish will require more power to take them out.

Choose a heavy enough weight so that you can get a clean shot through the fish’s body without having to put too much force behind your arrow. In the end, it’s important to experiment with different weights and find what works best for you and the type of fishing you’re doing. With some practice, you’ll be hitting your targets in no time!


In order to tie a bowfishing arrow without a slide, you will need the following items: a length of fishing line, a sharp knife, and a piece of duct tape. First, cut the fishing line to the desired length, and then tie one end of the line to the center of the shaft near the back of the arrow. Next, use the knife to make two slits in the duct tape, one on each side of the shaft.

Then, thread the other end of the fishing line through these slits and pull tight. Finally, tie off the ends of the fishing line so that it is secure.