How to Setup Lts Dvr for Remote Viewing

When it comes to security, your home is your castle. You want to make sure that you have the best possible system in place to protect your loved ones and possessions. A great way to do this is to invest in a quality DVR system that can be used for remote viewing.

Here are some tips on how to set up your DVR for remote viewing so that you can keep an eye on things even when you’re not at home.

  • Purchase a Lorex Long-Range Wireless security system that includes an LTE-ready DVR
  • Mount the cameras in desired locations around your property, making sure to keep them within range of the DVR base station
  • Connect the cameras to the DVR using the included wireless receiver and transmitter
  • Set up your account with Lorex Cloud, which will allow you to remotely view your cameras from anywhere with an internet connection
  • Follow the instructions on Lorex Cloud to add your DVR and activate live streaming from your cameras

How to Configure Dvr for Remote Viewing

Most people nowadays have a DVR at home to record their favorite TV programs. But what if you want to watch those recordings while you’re away from home? You can do that by configuring your DVR for remote viewing.

Here’s how: 1. Connect your DVR to the internet. This can be done via Ethernet or Wi-Fi.

2. Download and install the remote viewing software on your computer or mobile device. For PC users, we recommend using TeamViewer; for Mac users, use Splashtop Streamer. Android and iOS users can download the Splashtop Remote app from their respective app stores.

3. Launch the remote viewing software and enter the IP address of your DVR when prompted. You can find this in the Settings menu of your DVR (usually under Network). 4. Once connected, you should be able to view and control your DVR as if you were at home!

How to Configure Dvr to Internet

If you want to be able to access your DVR remotely over the internet, you’ll need to configure it accordingly. Here’s a step-by-step guide on how to do just that: 1. Start by logging into your router’s web interface.

This is typically done by entering the router’s IP address into your web browser’s address bar. 2. Once logged in, look for the port forwarding section. This is usually found under a heading like “Advanced” or ” NAT/QoS.”

3. In the port forwarding section, create a new rule that forwards traffic from the internet (WAN) to your DVR’s private IP address on port 8080 (or whatever port you’ve configured your DVR to use). 4. Save your changes and exit the router’s web interface. 5. To test that everything is working, try accessing your DVR’s web interface from another computer on the same network.

Lts Dvr Manual

An LTS DVR is a digital video recorder that allows you to record, store and playback video from CCTV cameras. It is a stand-alone device that connects to your TV or monitor via HDMI or VGA cable. The recording quality of an LTS DVR is exceptional, providing clear and sharp images even when played back on a large screen.

How to Access Dvr Remotely With Static Ip

If you have a DVR and want to be able to access it remotely, you will need to set up a static IP address. This can be done by logging into your router and finding the section for port forwarding. Once you have found this section, you will need to add a new rule that forwards traffic on port 80 (or the port that your DVR uses) to the static IP address of your DVR.

Once you have set up port forwarding, you will then need to go into your DVR’s settings and configure it to use a static IP address. Once you have done this, you should be able to access your DVR remotely by going to its IP address in a web browser.

How to Configure Hikvision Dvr for Remote Viewing

If you have a Hikvision DVR and want to be able to view it remotely, there are a few things you need to do. First, you’ll need to configure your router for port forwarding. This will allow traffic from the internet to reach your DVR.

Next, you’ll need to set up a static IP address for your DVR. This will ensure that your DVR always has the same IP address, even if your router’s IP address changes. Finally, you’ll need to create a user account on the Hikvision website and input your DVR’s information so that you can access it remotely.

Once you’ve completed these steps, you should be able to view your Hikvision DVR remotely using the web browser or mobile app.

How to Setup Lts Dvr for Remote Viewing


How Do I Connect My Dvr to Remote Viewing?

If you have a DVR, you know that it’s a great way to record your favorite shows or movies. But did you know that you can also use it for remote viewing? That’s right – with the right setup, you can watch your DVR from anywhere in the world.

Here’s how to do it: First, you’ll need to make sure that your DVR is connected to the internet. This can be done through a wired connection or Wi-Fi.

Once your DVR is online, log into your account on the manufacturer’s website. From there, you should be able to find the instructions for setting up remote viewing. The process will vary depending on the brand of DVR you have, but generally speaking, you’ll need to enter some settings into your DVR (such as an IP address and port number) and then create a user name and password.

Once that’s all set up, you should be able to access your DVR from anywhere in the world using the login information you created. So there you have it – with just a few simple steps, you can start watching your DVR from anywhere in the world!

How Do I Connect My Dvr to My Phone?

If you want to be able to view your DVR’s recordings on your phone, you’ll need to connect it to your home network. This can usually be done by connecting an Ethernet cable from the DVR to a router, or by using a wireless connection. Once the DVR is connected to the network, you’ll need to install a mobile app that supports viewing of DVR content.

Many apps will require that you create an account and login before you can view any content. Once you have the app installed and set up, open it and navigate to the “Live TV” or “Recordings” section. Here you should see a list of all the channels that your DVR is tuned to.

Selecting one of these channels will begin playback of the recording.

How Do I Connect My Lts Dvr to Wifi?

If you want to connect your LTS DVR to WIFI, there are a few things that you need to do. First, make sure that your DVR is in an area where there is a strong WIFI signal. Then, find the WIFI menu on your DVR and select the network that you want to connect to.

Once you have selected the network, enter the password for the network and press “connect.” Your LTS DVR should now be connected to WIFI!

How Do I Find the Ip Address of My Lts Dvr?

To find the IP address of your LTS DVR, you will need to access the web interface for your device. To do this, you will need to know the IP address of your router and the web port that your DVR is using. Once you have this information, you can type the IP address of your router into a web browser followed by : (colon) and the web port number.

This will bring up the login page for your DVR. From here, you can click on the ‘Network’ tab and then select ‘TCP/IP Settings’. The IP address of your DVR will be displayed here.


If you have an LTS DVR, you can remotely view it from anywhere in the world as long as you have an internet connection. Here’s how to set it up for remote viewing: 1. Log into your DVR and go to the main menu.

2. Select “Network” and then “Remote Client.” 3. Enter the IP address of the computer that you will be using to remotely view your DVR. This can be found by going to “Start” and then “Run” on a Windows PC, or by opening Terminal on a Mac.

Type in “ipconfig” and hit enter. Your IP address will be displayed. 4. Check the box next to “Enable Remote Client.”