How to Reupholster an Armless Slipper Chair for a Chic Look

Introduction

If you’re looking for a quick and easy way to give your home a fresh new look, why not try reupholstering an armless slipper chair? It’s a relatively simple project that anyone can do, and it’ll make a big impact in any room. In this blog post, we’ll show you how to do it step by step.

Supplies You Will Need.

Fabric.

When reupholstering a piece of furniture, you will need to choose a fabric that is both durable and stylish. There are many different types of fabrics available, so it is important to do some research in order to find the best option for your needs. One type of fabric that is often used for upholstery projects is cotton duck. This fabric is very sturdy and can be found in a variety of colors and patterns.

Foam.

In order to give your chair a comfortable seat, you will need to add some foam padding. There are various types of foam available, so it is important to choose one that is firm yet still soft enough to sit on for long periods of time. One option that often works well for upholstery projects is high-density polyurethane foam. This type of foam can be found at most craft stores or online retailers specializing in upholstery supplies.

Stapler.

A stapler will be necessary in order to attach the fabric to the frame of the chair. It is important to choose a stapler that is heavy duty enough to handle the thick fabric and foam padding you will be using. A pneumatic stapler typically works well for this type of project.

Scissors.

In order to cut the fabric and foam to the correct size, you will need a good pair of scissors. Fabric shears are often the best type of scissors to use for upholstery projects, as they are designed to cut through thick fabrics without fraying the edges.

How to Remove the Old Upholstery.

Remove the staples.

Using a flathead screwdriver, remove all of the old staples from the chair. Be careful not to damage the wood underneath.

Remove the fabric.

Carefully remove the old fabric from the chair, taking note of how it was originally attached. You may need to use a seam ripper to loosen any stubborn areas.

Remove the foam.

Remove the old foam from the chair, being careful not to tear it. You will need this as a template for cutting your new foam later on.

How to Cut and Attach the New Fabric.

Cut the fabric.

To begin, you will need to cut your new fabric. You will want to allow for about two inches of excess fabric on each side of the chair. Once you have cut the fabric, set it aside.

Attach the fabric.

Next, you will need to attach the new fabric to the chair. You can do this by stapling it into place. Start by pulling the fabric tight and stapling it along one side of the chair. Then, continue around all four sides of the chair until it is fully covered. Be sure to pull the fabric taut as you go to avoid any wrinkles or creases in the final product.

Attach the foam.

After you have attached the new fabric, you will need to add some foam padding for comfort. Cut a piece of foam that is slightly smaller than your piece of fabric and staple it into place over top of the fabric. Be sure to pull the foam taut as you staple it so that there are no bumps or lumps in the final product.Subsection 3 .4 Replace the staplesFinally, replace any staples that may have come loose during the reupholstering process. Once all of the staples are secure, trim any excess fabric from around the edges of the chair using a sharp pair of scissors.

How to Finish the Chair.

Trim the excess fabric.

Using scissors, trim the excess fabric around the edges of the chair. Be sure to leave about 1/2 inch of fabric so that you can fold it over and staple it down.

Add decorative touches.

Now is the time to add any decorative touches you want! You could add some piping around the edges, or tuft the fabric in certain areas. Once you’re happy with how it looks, your chair is finished!

Conclusion

After following the steps in this blog post, you will have successfully reupholstered an armless slipper chair for a chic look. This project is not as difficult as it may seem and can be completed in a few hours. With some basic supplies and a little bit of effort, you can give old furniture a new lease on life.