How to Reset Your Whirlpool Dryer Like a Pro: Quick and Easy Steps

How to Reset Your Whirlpool Dryer Like a Pro: Quick and Easy Steps

To reset a Whirlpool dryer, unplug it from the power source for a few seconds, and then plug it back in. Whirlpool dryers are reliable and efficient appliances that help make laundry tasks easier and more convenient.


However, like any electronic device, they may occasionally encounter issues that require a reset. Resetting the dryer can often resolve minor glitches and restore normal operation. In this guide, we will explain how to reset a Whirlpool dryer. By following a few simple steps, you can quickly troubleshoot common issues such as unresponsive controls, error codes, or malfunctioning settings.


Whether you’re a homeowner or a renter, this information will come in handy whenever you need to reset your Whirlpool dryer and get back to doing your laundry efficiently.

How to Reset Your Whirlpool Dryer Like a Pro: Quick and Easy Steps




Step 1: Power Off The Dryer

When it comes to resetting your Whirlpool dryer, the first and most crucial step is to power off the appliance. By doing so, you can ensure a safe and effective reset process. There are two methods to power off your dryer: unplugging it from the power outlet or turning off the circuit breaker. Let’s explore both options:

Unplug The Dryer From The Power Outlet

To kick off the reset process, simply unplug your Whirlpool dryer from the power outlet. This will completely cut off the electrical supply to the appliance. Make sure you locate the power cord, which is typically located at the back of the dryer, and firmly pull it out of the outlet. Take caution not to yank the cord forcefully, as it may damage the plug or the outlet itself.

Turn Off The Circuit Breaker

If unplugging the dryer isn’t a viable option, you can alternatively turn off the circuit breaker that controls the dryer’s power in your electrical panel. To do this, you need to locate the circuit breaker in your home and identify the one that corresponds to your dryer. Typically, it will be labeled as “Dryer” or “Laundry.” Once you have identified the correct breaker, simply switch it off by flipping it to the “Off” position.

By following either of these methods, you can effectively power off your Whirlpool dryer and get ready to proceed with the reset process. Take a moment to ensure that the dryer is no longer receiving power before moving on to the next steps. With the power supply cut off, you can now move on to Step 2 and begin the resetting process for your Whirlpool dryer.

How to Reset Your Whirlpool Dryer Like a Pro: Quick and Easy Steps




Step 2: Access The Control Panel


To reset your Whirlpool dryer, start by accessing the control panel. This process will allow you to troubleshoot issues and reset the dryer for optimal performance. Follow these steps to easily access the control panel.

Locate The Control Panel On Your Whirlpool Dryer

Before you can start resetting your Whirlpool dryer, you need to locate the control panel. The control panel is usually located on the top or the front of the dryer, depending on the model. Take a look at the dryer and identify where the control panel is located.

Remove The Control Panel Cover

Once you’ve located the control panel, the next step is to remove the control panel cover. This cover protects the control panel from any damage or dust. To remove the cover, follow these simple steps:

  1. Make sure the dryer is unplugged to avoid any electrical accidents.
  2. Find the screws that secure the control panel cover in place.
  3. Using a screwdriver, carefully loosen and remove the screws.
  4. Set the screws aside in a safe location where they won’t get lost.
  5. Gently lift the control panel cover to expose the control panel underneath.

Now that you have successfully removed the control panel cover, you can move on to the next step of the resetting process.


Step 3: Reset The Dryer

Resetting your Whirlpool dryer can help troubleshoot and resolve various issues, such as unresponsiveness or error codes. Follow these steps to reset your Whirlpool dryer:

Stronglocate The Reset Button/strong

Before resetting the dryer, you need to locate the reset button. The reset button is typically found either on the control panel or at the back of the dryer. Refer to your Whirlpool dryer’s user manual if you’re having trouble finding it.

Strongpress And Hold The Reset Button/strong

To initiate the reset process, press and hold the reset button for about 5 seconds. Make sure you press it firmly and hold it down to ensure the reset is successful.

Once you’ve held the reset button for 5 seconds, release it and wait for a few moments. The dryer will go through a reset cycle, and you may hear a beep or see the lights on the control panel blink briefly.

If the reset was successful, your Whirlpool dryer should now be reset and ready to use. Ensure you follow any additional reset instructions specific to your model, as outlined in the user manual.

In the next section, we’ll discuss some common problems you may encounter with your Whirlpool dryer and how to troubleshoot them effectively.

How to Reset Your Whirlpool Dryer Like a Pro: Quick and Easy Steps




Step 4: Power On And Test Your Dryer


To reset your Whirlpool dryer, follow step 4 by powering on and testing the appliance. Make sure to carefully follow the instructions to ensure a successful reset.

Plug The Dryer Back In

Once you have reset your Whirlpool dryer and ensured that all settings are correct, it’s time to plug it back in. Locate the power cord at the back of the dryer and insert it firmly into the wall socket. Make sure that the plug is secure and there are no loose connections.

Checking this step is crucial as any loose connection could prevent your dryer from functioning properly. If the plug is not fully inserted or there is a loose connection, your dryer may not power on or run efficiently. Take a moment to double-check and ensure that the plug is securely in place.

Turn On The Circuit Breaker

With the dryer plugged in, it’s time to turn on the circuit breaker. Locate the circuit breaker panel in your home, which is usually found in the basement, garage, or utility room. Open the panel and find the breaker labeled for your dryer. Most likely, it will be labeled “Dryer” or “Laundry Room.”

Flip the breaker switch fully to the “On” position. You should hear a click or feel the switch engage. This step is important as a tripped or off circuit breaker can prevent the dryer from receiving power. By turning it on, you are ensuring that the electrical power is flowing to your dryer, enabling it to function properly.

Check If The Dryer Is Functioning Properly

After plugging in the dryer and turning on the circuit breaker, it’s time to check if your Whirlpool dryer is functioning properly. Start by selecting a cycle and pressing the start button. Listen for the hum of the motor and the sound of the drum spinning. Observe if the display lights up and if the dryer goes through its normal cycle.

As the dryer operates, pay attention to any unusual noises or smells that could indicate a problem. Additionally, monitor the temperature and airflow to make sure they are adequate. The heat should be consistent and the air should flow freely. If you notice any abnormalities or the dryer fails to work as expected, you may need to consult the Whirlpool manual or contact a professional technician for further assistance.

Frequently Asked Questions On How To Reset Whirlpool Dryer


How Do I Reset My Whirlpool Dryer?


To reset your Whirlpool dryer, unplug it from the power source for one minute, then plug it back in. This will clear any error codes and reset the machine. If the issue persists, refer to the product manual or contact Whirlpool customer support for further assistance.


Why Is My Whirlpool Dryer Not Starting?


If your Whirlpool dryer is not starting, check if it is properly plugged in and the circuit breaker is not tripped. Also, ensure that the door is closed securely and the “Start” button is pressed firmly. If the problem persists, there may be an issue with the thermal fuse or the door switch, in which case professional diagnosis and repair may be necessary.


How Often Should I Clean The Lint Trap In My Whirlpool Dryer?


It is important to clean the lint trap in your Whirlpool dryer after every use. Built-up lint can restrict airflow and cause the dryer to overheat. Regular cleaning will improve the dryer’s efficiency and prevent potential fire hazards. Simply remove the lint screen, gently rinse it under water, and allow it to dry completely before reinserting it into the dryer.




Resetting your Whirlpool dryer is a simple process that can save you time and money. By following the steps outlined in this guide, you can troubleshoot and resolve common issues with your dryer, such as error codes or malfunctioning controls.


Remember to consult your user manual for specific instructions and safety precautions. With a little patience and know-how, you’ll have your Whirlpool dryer back up and running in no time.