How to Remove a Destroyed Oil Filter

By

If you have ever worked on a car before, then you know how important it is to change the oil filter regularly. However, sometimes the oil filter can get damaged and need to be removed. Here are some tips on how to remove a destroyed oil filter.

First, you will need to gather some tools including an oil catch basin, a pair of pliers, and a screwdriver. You will also need a replacement oil filter. Once you have all of your supplies, locate the old oil filter on the car.

It is usually located near the engine.

Table of Contents

How to remove a STUCK ON oil filter, Bogerts Talon oil filter tool, DIY Ford 292 Y Block

  • Remove the oil filter cap from the engine using an appropriate wrench
  • Place a drain pan underneath the oil filter to catch any spilled oil
  • Use an oil filter removal tool to remove the destroyed oil filter from the engine
  • Some removal tools will require that you first puncture the filter to release the pressure before unscrewing it
  • Clean up any spilled oil and dispose of the used oil and destroyed filter properly

1) How Do I Remove a Destroyed Oil Filter

If your oil filter has been destroyed, it can be difficult to remove. The first step is to drain the oil from your car. Once the oil has been drained, you will need to remove the oil filter housing.

This can be done by unscrewing the housing or by removing the bolts that hold it in place. Once the housing has been removed, you should be able to see the destroyed oil filter. To remove it, you will need to use a pair of pliers or a screwdriver.

Once you have removed the destroyed oil filter, you can install a new one in its place.

Conclusion

Oil filters play an important role in keeping your car’s engine clean. Over time, however, they can become clogged or damaged, making them less effective. If you find yourself with a destroyed oil filter, there are a few steps you can take to remove it.

First, make sure the engine is cool before attempting to remove the filter. Once it’s cool, locate the filter and unscrew it using an oil filter wrench. If the filter is stuck, you may need to use a hammer to tap it loose.

Once the filter is removed, inspect it for damage and debris. If the filter is heavily damaged, it’s best to replace it with a new one. However, if only minor damage is present, you may be able to clean the filter and reuse it.