How to Open a Tonneau Cover

A tonneau cover is a great way to keep your belongings safe and dry while driving. Here are some tips on how to open a tonneau cover: First, make sure that the cover is completely dry before attempting to open it.

If the cover is wet, it may be difficult to open or close. Next, locate the release latch or handle. This is usually located near the front of the cover.

If the cover has a rear latch, pull it towards you to disengage it. If there is no rear latch, you will need to lift the front of the cover up slightly in order to disengage the front latch. Once both latches are released, you should be able to lift up on the tonneau cover and open it fully.

What is a Soft Tonneau Cover? –

  • Open the cover of the tonneau by unlatching it from the front
  • Pull the cover towards the rear of the truck bed until it is fully open
  • Securing straps may need to be unfastened in order to fully open the cover
  • Once opened, propping up the cover with something like a broom handle will keep it from closing on its own and make it easier to access items in the bed of the truck

Q: What is a Tonneau Cover

A tonneau cover is a hard or soft cover that spans the entire bed of a pickup truck. Hard covers are generally made of aluminum or fiberglass and can be painted to match the color of the truck. Soft covers are made of vinyl or cloth and typically roll up for easy storage.

Tonneau covers keep your cargo dry and secure, and can improve your gas mileage by reducing wind drag.

It Protects Your Cargo from Weather And Prying Eyes, And Can Improve Your Gas Mileage by Reducing Wind Drag

A cargo cover is a must-have accessory for any car with a trunk. It protects your belongings from the elements and prying eyes, and can also help improve your gas mileage by reducing wind drag. When shopping for a cargo cover, keep in mind the size of your trunk and the type of materials you want it to be made from.

You’ll also want to make sure it’s easy to install and remove, so you can quickly access your trunk when you need to.

Q: How Do I Open My Tonneau Cover

Assuming you have a roll-up tonneau cover: To open your roll-up tonneau cover, first locate the release lever or handle. This is usually located on either side of the cab near the tailgate.

Once you’ve found it, pull the lever or handle to release the latches that are holding the cover in place. Next, grab hold of the front bar of the cover and gently lift it until it’s fully retracted. If you have a model with an automatic tensioner, this will happen automatically as you lift.

For manual tensioners, you’ll need to use the knob or lever to adjust as needed. And that’s it! Your tonneau cover is now fully open and ready for use.

Simply Unlatch the Cover And Fold It Back to Access Your Cargo Area

When you need to access your cargo area in your vehicle, simply unlatch the cover and fold it back. This will give you full access to the area so that you can easily load and unload whatever you need. Make sure to latched the cover back into place when you’re finished so that everything stays secure.

If You Have a Folding Tonneau Cover, You’Ll Need to First Unlatch the Front Panel And Then Fold It Back Towards the Cab of Your Truck

If you have a folding tonneau cover, you will need to first unlatch the front panel and then fold it back towards the cab of your truck. How far you need to fold it back depends on the make and model of your truck, but typically, it is not necessary to completely remove the cover. If you have a hard tonneau cover, you may need to remove it completely in order to access your cargo area.

Then, You Can Either Fold the Entire Tonneau Cover in Half Or Roll It Up Towards the Front of the Bed

Assuming you are talking about a soft tonneau cover: There are several ways to remove a soft tonneau cover. The first is to fold it in half and then take it off the truck.

This is the easiest way to remove the cover, but it does take up a lot of space. The second way to remove a soft tonneau cover is to roll it up towards the front of the bed. This takes less space than folding it in half, but it can be more difficult to get started.

Q: How Do I Close My Tonneau Cover

If you have a tonneau cover on your pickup truck, you know how useful it can be for keeping your cargo safe and secure. But what do you do when you want to close the tonneau cover? Here are some instructions on how to close a tonneau cover:

1. Locate the two release levers on either side of the tonneau cover. These are usually located near the front of the cover. 2. Push in on both release levers at the same time.

This will disengage the locking mechanism and allow you to start closing the cover. 3. Close the cover until it is fully latched shut. You may need to push down on it slightly to make sure it is locked in place.

4. Check all four corners of the cover to make sure that it is properly secured before driving away.

Make Sure That All Latches are Properly Secured before Driving

Most people know that it is important to make sure all doors are properly closed before driving, but many don’t realize the importance of making sure all latches are properly secured. All it takes is one unsecured latch for a door to fly open while driving and cause serious injury or even death. It is therefore imperative that all latches be checked and secured before getting on the road.

This means taking the time to open and close each door, as well as checking that the latching mechanism is engaged. It might seem like a hassle, but it could mean the difference between a safe drive and a tragic accident. So next time you’re getting ready to hit the road, take an extra minute or two to ensure that all your vehicle’s latches are properly secured – it could save a life.


A tonneau cover is a hard or soft cover that seals the bed of a pickup truck. This not only protects your cargo from the elements, but also keeps prying eyes from seeing what you’re hauling around. Whether you’re looking to save on gas or keep your tools and gear safe, a tonneau cover is a great investment for any truck owner.

Here’s how to open a tonneau cover: First, locate the release latch inside the cab of your truck. This will be located near the tailgate, on either side of the bed.

Once you’ve found the latch, use your thumb to push up on the lever until it releases. Next, grab hold of the cover and lift it up until it’s fully open. If you have a hardcover, you may need to prop it open with something like a bungee cord or rope so that it doesn’t slam shut.

Finally, secure the cover in an upright position by attaching it to the provided hooks or latches on either side of the bed. This will ensure that your cover stays put while you’re driving down the road. And that’s all there is to opening a tonneau cover!