How to Charge Kangaroo Doorbell

It’s easy to charge your kangaroo doorbell! Just follow these simple steps: 1. Plug the charging cable into the back of the doorbell.

2. Insert the other end of the cable into a USB port on your computer or power adapter. 3. The red light on the doorbell will blink to indicate that it’s charging. 4. Once the red light stops blinking and turns solid, your doorbell is fully charged and ready to use!

  • Plug the charging cable into the back of the doorbell
  • Insert the other end of the cable into a USB port or power adapter
  • The doorbell will begin charging automatically
  • Once the doorbell is fully charged, unplug the cable from both devices

Kangaroo Doorbell Camera Battery Replacement Video

If you’re like most people, you probably don’t think too much about your doorbell camera battery until it’s time to replace it. And when that time comes, you might be surprised to learn that there’s more to replacing the battery than just popping in a new one. In this video, we’ll show you how to replace the battery in your Kangaroo Doorbell Camera.

We’ll also give you some tips on how to prolong the life of your battery so you don’t have to replace it as often. Replacing the battery in your Kangaroo Doorbell Camera is a pretty simple process. Just follow these steps:

1. Remove the faceplate from the camera using a Phillips head screwdriver. 2. Unscrew the retaining screws and remove the old battery. 3. Insert the new batteries and screw them in place.

Be sure not to overtighten them! 4 . Snap the faceplate back into place and screw it tight with your Phillips head screwdriver.

That’s it! You’re done!

Kangaroo Doorbell Battery Replacement

If your kangaroo doorbell battery is running low, it’s time to replace it! Here’s how: 1. Start by unscrewing the backplate of your doorbell.

This will give you access to the battery compartment. 2. Inside, you’ll find a small lithium-ion battery. Carefully remove it and dispose of it properly.

3. Next, insert a new lithium-ion battery into the compartment and screw the backplate back on. 4. That’s it! Your doorbell should now be good as new with a fresh battery powering it up.

Kangaroo Doorbell Instructions

Looking for a unique doorbell for your home? Why not try a kangaroo doorbell! These fun and festive doorbells are sure to add some personality to your front porch.

Plus, they’re easy to install and come with detailed instructions. Here’s everything you need to know about kangaroo doorbells: What You Need:

-1 kangaroo doorbell (available at most home improvement stores) -Screwdriver -Level

-Drill Directions: Before starting, find the perfect location for your new kangaroo doorbell. Keep in mind that you’ll need to be able to reach the bell button from inside your house.

Once you’ve found the perfect spot, use a screwdriver to remove the existing doorbell (if there is one). Next, hold the kangaroo doorbell up to the wall and use a level to make sure it’s straight. Once it’s level, mark the holes where you’ll need to drill.

Remove the doorbell and drill pilot holes into the marked spots. Finally, screw in the mounting hardware that comes with the doorbell and reattach the bell button. That’s it!

Kangaroo Doorbell Installation

Assuming you would like a blog post discussing the installation of a kangaroo doorbell: Kangaroo Doorbell Installation Have you ever seen those cute little kangaroo doorbells and thought to yourself, I need one of those?

Well, installing one is actually pretty easy! Here’s a step-by-step guide on how to do it. First, find a spot for your kangaroo doorbell.

You’ll want to make sure it’s in a place where it will be visible to visitors, but also out of the way so it doesn’t get in the way. Once you’ve found the perfect spot, mark where the holes will go with a pencil. Next, use a drill to create pilot holes for your screws.

Once the pilot holes are made, insert the screws and tighten them until they’re snug. Be careful not to overtighten them, or you could strip the screws. Now it’s time to install the actual doorbell button.

There will be two wires coming out of the back of it – one black and one white.

How to Reset Kangaroo Doorbell

If you’ve been having trouble with your Kangaroo Doorbell, resetting it may be the best way to get it back up and running again. Here’s how to do it: First, make sure that the doorbell is turned off.

Next, remove the battery cover and take out the batteries. After that, press and hold the reset button for 15 seconds. Finally, replace the batteries and reattach the cover.

Once you’ve done all of this, your Kangaroo Doorbell should be reset and working properly again.

How to Charge Kangaroo Doorbell


What Kind of Batteries Does Kangaroo Doorbell Use?

Kangaroo doorbells use AA batteries. You can find these batteries at any store that sells batteries. Make sure to get the right size battery for your doorbell.

How Long Does the Battery Last on Kangaroo Doorbell?

Assuming you are talking about the battery-operated doorbell, most batteries will last around two to three years. The Kangaroo Doorbell specifically uses 4 AA batteries.

Why is My Kangaroo Doorbell Camera Not Working?

One of the most popular questions we get from our customers is, “Why is my Kangaroo Doorbell Camera not working?” There are a few reasons this could be happening. Here are some things to check if you’re having trouble with your camera:

1. Make sure that the batteries are fully charged. If they’re not, charge them for at least 3 hours before trying to use the camera again. 2. Check to see if the WiFi connection is strong enough.

The camera needs a strong signal in order to work properly. If you’re too far away from your router, try moving closer or connecting to a different network. 3. Make sure that the doorbell is properly mounted and aligned.

If it’s not flush with the doorframe, it won’t work correctly. 4. Sometimes, dust or debris can build up on the lens and cause problems with the image quality. Try cleaning the lens with a soft cloth to see if that helps improve things.

5 .

How Do You Take the Cover off a Kangaroo Doorbell?

Assuming you would like Kangaroo’s installation instructions: 1. Begin by removing the doorbell from the wall. You may need a screwdriver to remove screws holding the doorbell in place.

With the doorbell removed, locate the cover plate on the backside. The cover plate is held in place with two small screws. 2. Use a Phillips head screwdriver to remove the two screws from the cover plate.

Be careful not to lose them as they are very small! With the screws removed, gently pull the cover plate away from the back of the doorbell. 3. There is a white plastic piece connecting the wires to terminals on the circuit board inside the doorbell.

Gently disconnect this piece by depressing each side and pulling it out. You can now see all ofthe wires connected to terminals onthe circuit board. 4. Locatethe green ground wire and disconnect it from its terminal by grasping it with needle-nose pliers and pulling it straight out (do not twist!).

Next, locatethe black “hot” wireand disconnect it in the same manner asthe green ground wire was disconnected. Finally, findthe red “door chime” wireand removeit as well.(The orderin whichyou disconnect thesewires does not matter.)

With all three wires disconnected, you can nowremovethecircuit boardfromthedoorbell housingby gently pullingitout wardand down throughthesmall opening inthe bottomof t hehousing . Be careful notto damage anyof th ecomponentsonth ecircuitboard asyouremov eit!5 .

Now thatyouhave access tot hecircuitboard ,youcan replace anyfaultycomponents orcleanany corrodedconnections . Onceyou havemade your repairsor adjustments ,reasse mblethedoor bellinthe reverseorderof disassembly : first reconnect allthree wires tot heirterminals ,being suretocorrectly connect eachwiretoits proper terminal(groundto green , hotto black ,chimeto red ) ; nextsnap th ewhite plastic connectorbackinto place; thenreplace andtighten bothscrews holding th ecoverplate inplace ; finally replacethe doorbel linits original positiononth ewall .


Kangaroo is a new company that makes a doorbell that you can charge with your smartphone. The doorbell has a built-in battery that lasts for up to six months, and it charges via micro USB. You can also use the Kangaroo app to check the battery level and see when the doorbell was last rung.