How to Charge Jimu Robot

Jimu Robot is an interactive, programmable robot that you can control with your smartphone or tablet. Charging Jimu Robot is easy and only takes a few minutes. Here’s how to do it:

1. Connect the included micro USB cable to Jimu Robot and plug it into a power outlet. 2. Once Jimu Robot is plugged in, the eyes will light up red to indicate that it’s charging. 3. When the eyes turn green, Jimu Robot is fully charged and ready to play!

Table of Contents

Reseating a battery Tutorial | JIMU ROBOT by UBTECH Robotics

Turn on your Jimu Robot by pressing and holding the power button for 3 seconds
The power button is located on the back of the robot’s head
Connect your Jimu Robot to its charging base using the magnetic charging cable
The charging port is located on the back of the robot’s neck
Press and hold the power button for 3 seconds to put your Jimu Robot into standby mode while it charges
Once your Jimu Robot is fully charged, press and hold the power button for 3 seconds to turn it off

How to Turn on Jimu Robot

If you’re like most people, you probably think of robots as advanced machines that require complex programming. But what if I told you that there’s a robot designed for anyone and everyone? Meet Jimu Robot: the build-it-yourself robot kit that anyone can use to create their own custom robot creations.

So how do you turn on Jimu Robot? It’s actually pretty simple! Just follow these steps:

1. Insert the batteries into the battery pack and connect it to the robot. 2. Press the power button on the back of the robot to turn it on. 3. Use the app to control your Jimu Robot and make it do whatever you want!

With Jimu Robot, there are no limits to what you can create. So get building and have fun!

Jimu Robot Instructions

If you’re looking for instructions on how to use your Jimu Robot, you’ve come to the right place. In this blog post, we’ll provide detailed instructions on everything from connecting your robot to assembling it. First, let’s start with connecting your Jimu Robot.

You’ll need to connect the power cable and USB cable to the control box, and then connect the control box to your device via Bluetooth. Once that’s done, you’re ready to start assembling your robot! There are three main parts to assembling your Jimu Robot: the body, arms, and legs.

We’ll start with the body. First, snap the bottom half of the body onto the circular platform. Then, take the top half of the body and snap it into place.

Next, we’ll attach the arms. There are two ways to do this: either insert them into pre-drilled holes in the body or use pegs on the underside of each armrest to attach them directly to the body. If you choose to use pegs, be sure that they’re facing inwards so that they can grip onto the sides of the body snugly.

Finally, we’ll attach the legs. There are also two ways to do this: either insert them into pre-drilled holes in The Body or use screws at The Bottom Of Each Leg To Attach Them Directly To The Body . Be sure not over-tighten these screws , as doing so may damage your robot .

Now that your robot is assembled , it’s time to start playing! Jimu Robots are controlled via a free app which can be downloaded from either The App Store Or Google Play . Once installed , open up The App And Follow The On-Screen Instructions To Connect Your Device To Your Robot Via Bluetooth .

Once connected , you ‘ ll be able To Choose From A Variety Of Pre-Programmed Moves Or Create Your Own Custom Routines Using Blockly – A Visual Programming Language . You Can Also Record And playback Sounds Using The App , Which Will Add An Extra Dimension Of Fun To Your Playing !

Jimu Robot Troubleshooting

If you’re having trouble with your Jimu Robot, there are a few things you can do to troubleshoot the issue. First, make sure that all of the connections are secure and that the batteries are properly inserted. If the robot still isn’t working, try resetting it by pressing and holding the power button for 10 seconds.

If the issue persists, please contact customer support.

Jimu Robot Flashing Green

If your Jimu Robot is flashing green, it means that the battery is low and needs to be recharged. To recharge your Jimu Robot, follow these steps: 1. Connect the charging dock to the power adapter.

2. Plug the power adapter into an outlet. 3. Place your Jimu Robot onto the charging dock so that the metal contacts on the bottom of the robot line up with the metal contacts on the dock. 4. The lights on your Jimu Robot will flash red while it charges, and then turn solid green when it is fully charged.

Jimu Replacement Battery

If you have a Jimu Robot, you know that the batteries are an essential part of the toy. Without them, your Jimu Robot will be nothing more than a pile of parts. So, when it comes time to replace the batteries in your Jimu Robot, it’s important to choose the right ones.

There are two main types of batteries for Jimu Robots: alkaline and lithium. Alkaline batteries are the most common type of battery and can be found in most stores. They’re also less expensive than lithium batteries.

However, they don’t last as long as lithium batteries and can leak if not used properly. Lithium batteries are more expensive, but they last longer and don’t leak. When choosing replacement batteries for your Jimu Robot, it’s important to consider what type of battery you want and how much you’re willing to spend.

If you just need occasional use, alkaline batteries may be sufficient. However, if you plan on using your Jimu Robot regularly, lithium batteries may be a better option.

Credit: www.amazon.com

How Do You Turn on a Jimu Robot?

There are three ways to turn on a JIMU robot. The first is to use the power button on the back of the robot. The second is to use the remote control that comes with the robot.

The third is to use the app that can be downloaded from the App Store or Google Play store. The power button is located on the back of the robot near the top. To turn on the robot, press and hold this button for two seconds.

The remote control has a power button located on the top left side. Press and hold this button for two seconds to turn on your JIMU robot. The app also has a power button located in the upper right corner of the main screen.

Once again, press and hold this button for two seconds to begin using your JIMU Robot Kit.

How Do You Code a Jimu Robot?

Assuming you would like a high-level overview of how to code a JIMU robot: The first step is to create an account and download the app. Then, users can start by choosing one of three modes: Blockly, Python or Text.

In Blockly, users can put together “blocks” of code to make their robot move. Python mode allows for more customization and complex commands. Lastly, Text mode is for experienced coders and gives users full control over their robot’s actions.

Once the desired mode is selected, it’s time to start coding! The app will walk through each step and provide instructions on what needs to be done. Users can test their code as they go to see if their robot behaves as expected.

When everything looks good, it’s time to hit the “run” button and watch the magic happen!

How Do I Connect My Jimu Robot to My Ipad?

If you want to control your JIMU robot with your iPad, you’ll need to connect the two devices. Luckily, this is a pretty easy process. Here’s what you’ll need to do:

1. Download the JIMU app from the App Store. 2. Make sure your iPad and JIMU robot are both turned on and within range of each other (about 30 feet). 3. Open the JIMU app on your iPad.

4. Tap the “Connect” button in the middle of the screen. 5. A list of available devices will appear; select your JIMU robot from this list. 6 If prompted, enter the passcode for your JIMU robot (the default passcode is 0000).

That’s it!

Conclusion

In this post, we’ll show you how to charge your Jimu Robot. You’ll need the following items: -1 Jimu Robot

-1 USB cable -1 power adapter (5V/2A) First, connect the USB cable to the port on the back of your Jimu Robot.

Then, plug the other end of the USB cable into either a power adapter or a computer’s USB port. Your Jimu Robot will begin charging automatically and will take about 2 hours to fully charge. Once it’s done charging, you can disconnect the USB cable and start playing with your robot!